Tubing Connectors and Fittings
Ace Glass, Inc. 15-25mm PTFE coupling
PTFE reducing coupling for threaded columns or fittings. Single o-ring seal for leak tight engagement with hand pressure.
Microsolv Technology Corporation Tubing Connector Fittings, High Pressure, One Piece, 1/16", PEEK, Natural, Large Head with 10-32 Screw Threads. Finger Tighten, 1 EA.
This is one of our , "Male Nuts" used to connect PEEK or Stainless Steel tubing in the high pressures zones of HPLC systems. Fitting has a 12mm diameter knurled head, 21mm total length (top to bottom) with a 13mm thread length. The large head makes it easier to produce the torque needed to achieve a good swaged, connection.
Microsolv Technology Corporation Tubing Connector Fittings, High Pressure, One Piece, 1/16", Carbon PEEK, Black, Winged Head with 10-32 Screw Threads. Finger Tighten, 10/PK.
These "Male Nuts" are used to connect PEEK or Stainless Steel tubing in the high pressures zones of HPLC systems. Fitting has a 15mm diameter knurled head that is "winged" for ease of generating torque, 21mm total length (top to bottom) with a 13mm thread length. Carbon PEEK has been reinforced with carbon fiber, giving it the highest strength and stiffness of all the PEEK grades and improving its load-carrying capacity.
Grainger Hex Coupling 316 SS 3/4 x 1/2 in FNPT
The Parker Hex Coupling 316 Stainless is a hex bore coupling made of 316 stainless steel. It has a 1-1/16 inch bore size and is rated for pressures up to 5000 psi. This coupling has a threaded female NPT connection on both ends and is designed for use in hydraulic applications where corrosion resistance is needed. The hex shape allows for easy wrench tightening during installation. Overall this is a high pressure stainless steel hydraulic coupling for corrosive environments.
Chemglass Life Sciences Adapter, 1" Beaded Pipe to 3/4" Sanitary, 316L Stainless Steel
Adapter, 1" Beaded Pipe to 3/4" Sanitary, 316L Stainless Steel Beaded pipe to sanitary fitting adapter connects to the 1¿ beaded pipe side arm of CG-1968-Q zero dead space drain valve. Approximate overall length of adapter is 2¿(52mm). NOTE: Requires a CG-1968-66 beaded coupling.
Chemglass Life Sciences 14/20 Outer Joint, 19.0mm x 1.8W Tubing
14/20 Outer Joint, 19.0mm x 1.8W Tubing. Ground Joint, Outer, Medium Length.
Microsolv Technology Corporation Tubing Connector Fittings, Low Pressure, 1/8", Carbon PEEK, Black with 1/4-28 Screw Threads, for use with Flange Free, polymeric tubing. 10/PK.
These "Male Nuts" are used to connect PEEK or Stainless Steel tubing in the low pressures zones of HPLC systems. This Two Piece Fitting must be used with a Ferrule. Carbon PEEK has been reinforced with carbon fiber, giving it the highest strength and stiffness of all the PEEK grades and improving its load-carrying capacity.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Fitting, HDPE, Straight, Hose Barb Reducer, 1/4"" ID x 3/16"" ID; 100/PK
These economical straight barbed reducing fittings easily connect fluid paths without the use of tools. Just slip your flexible tubing or hose onto the barb to create a secure seal.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Fitting, Nylon, Straight, Hose Barb Reducer, 1/4"" ID x 1/8"" ID; 10/PK
These economical straight barbed reducing fittings easily connect fluid paths without the use of tools. Just slip your flexible tubing or hose onto the barb to create a secure seal.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Fitting, HDPE, Straight, Hose Barb Reducer, 1/4"" ID x 1/8"" ID; 100/PK
These economical straight barbed reducing fittings easily connect fluid paths without the use of tools. Just slip your flexible tubing or hose onto the barb to create a secure seal.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Fitting, HDPE, Straight, Hose Barb Reducer, 1/4"" ID x 1/8"" ID, pack of 10
These economical straight barbed reducing fittings easily connect fluid paths without the use of tools. Just slip your flexible tubing or hose onto the barb to create a secure seal.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Fitting, Nylon, Straight, Hose Barb Union, 5/32"" ID; 100/PK
These economical straight barbed fittings easily connect fluid paths without the use of tools. Just slip your flexible tubing or hose onto the barb to create a secure seal.